Sharkoon T5 Economy Specifiche

Manual

T5 ECONOMY6. Installation of a HDD1.AttachthemountingrailstotheHDDfrombothsides(g.7).  MountingrailsforHDDsg.72. Slide the HD

T5 ECONOMYNotes:A maximum of five 3.5" HDDs may be installed into the HDD cage. Further HDDs may be installed to the mounting bays for 5.25"

T5 ECONOMY  g.11                  g.12 (Carefullytakeoutanoptionallypresentmetalbezelcoveringthe3.5"drivebay

T5 ECONOMY8. Installation of a 3.5" device(1.Removethecase’sfrontpanelbygentlydraggingittowardsyou.)2. Dismantle the 5.25" front

T5 ECONOMY5. Connect the 3.5" device to the power supply and the mainboard.6.Screwthe5.25"bezelwith3.5"openingintothefront

T5 ECONOMY2.Insert the add-on card into the mainboard’s respective slot and x it to the case by  re-attachingthexationscrew(

T5 ECONOMY12. Using the mounting for 2.5" and 3.5" HDDs/SSDs1. Place the HDD/SSD into the mounting frame. 2.5" HDD/SSD

T5 ECONOMYLegal disclaimer:AsacontinuingpolicyofproductimprovementatSHARKOON,thedesignandspecicationsaresubjecttochangewithoutprior

T5 ECONOMYContent1. Features2. Package content3. The case at a glance4. Installation of a mainboard5. Installation of a PSU6. Instal

T5 ECONOMY1. Features • ATXcase • 5x5.25"drivebays(external) • 5x3.5"baysforHDDs(internal) • FrontI/Owith4xUSB2.0,1x

T5 ECONOMYMountingrailsforHDDs QuickfastenersforODDsMounting frame for 2.5"and 3.5" HDDs/SSDs Mountinganglesfor3.5"devic

T5 ECONOMY3. The case at a glance Front view A – Front I/OB– 5.25"drivebaysC– Airinlet,covered:pre-installed120mmLEDfan(blu

T5 ECONOMYSideview(opened/left) A – Drive bays for 5.25" devicesB– Mainboardmountingpanelwith: a – Installation opening for

T5 ECONOMY4. Installation of a mainboard1. Open the case by loosening the thumb screws on the case’s back side and removing the left  sidepanel.L

T5 ECONOMY3. Remove the mainboard and screw the stand-offs into the respective drillings of the  mountingpanel(g.3).(Stand-offs)

T5 ECONOMY6. Plug the connectors of the case’s front bezel to the respective connectors of the mainboard  (alsorefertoyourmainboard’smanualfo